麥海勒（北京）農業科技有限公司
會員1.png)
麥海勒（北京）農業科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
農機網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2021-11-12 09:34:20瀏覽次數：292次
聯系我時，請告知來自 農機網
At the higher end of the McHale F5000 Fixed Chamber Round Baler Range is the McHale F5600 fully automatic round baler, this is the highest specification round baler in the McHale F5000 round baler range.
The McHale F5600 is fitted with a servo operated load sensing control valve and an expert plus control console, which makes the round baling process fully automatic.
Once the round bale is formed, net is automatically applied; the tailgate then automatically opens releasing the high density round bale, the tailgate on the F5600 baler then automatically closes and pressurises.
The F5600 fully automatic round baler comes standard with all the high specification features of the F5500 round baler but also benefits from;
On the McHale F5600 Fully Automatic Round Baler, the left hａnd side of the gearbox drives rollers in the bale chamber, while the pick up and chopper unit are driven from the right hａnd side of the machine. This system ensures direct short transfer paths and optimal power distribution.
The McHale F5600 fully automatic round baler is equipped with a 2.1 metre galvanised pick up, which lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The F5600 fully automatic round baler comes standard with pneumatic guide wheels, which contact the ground on exactly the same line as the tines and guide the pick up perfectly over uneven ground.
Read MoreThe pick up on the F5600 fully automatic baler is fitted with lateral feed augers that smoothly guide the crop into the chopping unit. The pick up features
A crop compression roller is also available as an optional extra on the McHale F5600 fully automatic round baler. This roller evens out lumps in the swarth and minimises the risk of blockages when working in heavy swarths.
The McHale F5600 fully automatic round baler is equipped with the same high capacity 25 knife chopper unit and rotor as the McHale Fusion 3 integrated baler wrapper. As crop enters the spiral rotor, pairs of rotating tines feed the crop through the chopping unit. The double tines on the rotor ensure high output while the spiral layout reduces the load peaks as the F5600 fully automatic round baler works in heavy swarths.
Read MoreAlso the rotor design maximises output by encouraging a uniform crop flow, which reduces the risk of blockages. With all 25 knive engaged, a theoretical chop length of 46mm is delivered. Knives can be engaged and disengaged from the tractor cab and are protected hydraulically against foreign objects.
The McHale F5600 fully automatic round baler is designed to achieve maximum output, however as baling conditions are not always ideal, uneven swarths can occur, which can lead to blockages. The main drive chain on the F5600 fully automatic baler is protected by a slip clutch on the PTO.
Read More
The bale chamber on the McHale F5600 fully automatic round baler produces a 1.23 X 1.25 metre round bale. The bale chamber on the F5600 baler is comprised of 18 heavy duty rollers. Chamber bearings are 50mm, with double raced bearings on the main load points to stａnd up to the most testing conditions.
Read MoreThe F5600 fully automatic baler is fitted with heavy-duty drive chains and sprockets, which ensure long life and minimum down time.
On the F5600 round baler, the roller ends are fitted with a McHale designed reverse thread sealing system, which ensures that any material, which tries to get into the back of the rollers, is automatically threaded out.
The bearings are supported by a progressive greasing system.
The blocks measure and regulate the amount of grease going to the bearings. This ensures that the machine consistently delivers the correct amount of grease depending on the load the bearings are under.
Once the bale is netted in the chamber of the McHale F5600 round baler, the tailgate of the baler automatically opens, allowing the high-density round bale to be ejected. Once the bale has passed over the bale kicker the tailgate of the baler automatically closes, allowing the operator to continue baling.
Read MoreIf the F5600 round baler is operating in hilly conditions the operator can choose to control the bale ejection process with the simple press of a button. On selecting this option the tailgate of the baler will open to release the bale, close and pressurise once the high density round bale has been released.
The McHale F5600 fully automatic round baler has a sensor on the bale kicker, which ensures that the bale has been ejected from the chamber before the tailgate closes.
An Expert Plus Control Console, which features a large graphic display, controls the McHale F5600 round baler; this allows the operator to monitor the baling process graphically from the control console.
Read MoreThe expert plus control box features;
Bale Density and the amount of net being applied to the bale can be adjusted through the control console without the operator ever having to leave the tractor cab.
A new high performance netter has been designed and developed for the F5000 range.
Read MoreThe net tension can be simply adjusted on a variable pulley on the right hａnd side of the machine and a decal displays the various settings that can be achieved using the system, depending on the net quality being used. This netter is very reliable and features:
Net loading has been optimised on the F5000 baler range by the simple yet very effective rock and roll net loading system. The operator simply releases the straps on the spare roll of net on the machine platform and rocks the net roll from its storage position over the lip in the platform and rolls it into the net box. Storage for an extra roll of net is provided on the baler platform.
| Width | 2.58m |
| Length | 4.05m |
| Weight | 3700kg |
| Height | 2.45m |
| Pick Up Lift | Hydraulic |
| Crop Roller | Optional |
| Short Crop Guard | Standard |
| Tine Spacing | 70mm |
| Tine Bars | 5 |
| Working Width | 2100mm |
| Pick Up Guide Wheels | Standard |
| Unblocking System | Drop Floor |
| Knife Deactivation | Hydraulic from Cab |
| Knife protection | Hydraulic |
| Theoretical Chop Length | 46mm |
| Number of Knives | 25 |
| Width (m) | 1.23 |
| Diameter (m) | 1.25 |
| Greasing | Automatic Progressive |
| Bearings | 50mm** |
| Number of Rollers | 18 |
| Bale Chamber Feed | Fusion Rotor |
| Net Adjustment | In Cab |
| Net Roll Capacity | 1+1 Storage |
| Net System | Vario Stretch |
| Control | Manual or Automatic |
| Chain Lubrication | Continuous |
| Pick Up Protection | Slip Clutch |
| Main Drive Protection | Cam Clutch |
| Gearbox | Split Drive |
| Density Adjustment | In Cab |
| Operation | Automatic |
| Control System | Expert Plus |
| Axle | 8 Stud |
| Road Lights | Standard |
| Bale Kicker Indicator | Standard |
| Tyres Standard | 500/50 – 22.5 |
| ** Bearings are double raced on the main load points | |
| Hydraulics | 2 double acting spools |
| Minimum Power Requirement | 75kW (100hp) |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
農機網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
