麥海勒（北京）農業科技有限公司
會員1.png)
麥海勒（北京）農業科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
農機網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2021-11-12 09:25:27瀏覽次數：254次
聯系我時，請告知來自 農機網LaunchedinSeptember2012
Launched in September 2012. The McHale Fusion 3 integrated baler wrapper consists of an 18 roller fixed chamber baler and an integrated vertical wrapping ring.
Over the last 10 years, there has been constant pressure on Farmers and Contractors to reduce costs. In response to this McHale developed the McHale Fusion 3 integrated baler wrapper, which combines two traditionally separate jobs; namely baling and bale wrapping and integrates them into a single operation, which can be done by one man and one machine. The Fusion 3 is unique in that it has been specifically designed as a high output Integrated Baler Wrapper.
McHale is now recognised as a worldwide leader in the production and development of Integrated Baler Wrappers, its flagship product is the McHale Fusion 3.
New Feature on the Fusion 3 over the earlier Fusion 2 include:- New Machine Guards – giving better access and a more modern look
The McHale Fusion 3 is fully automatic and one user-friendly control console in the tractor cab controls the baling and wrapping process. The McHale Fusion 3 Integrated Baler Wrapper is a robust machine, which is simply not a wrapper coupled onto a baler; it has been specifically designed as a high output Integrated Baler Wrapper. The Fusion 3 Integrated Baler Wrapper is also unique in that it has a patented bale transfer. This results in keeping the Fusion 3 short and improving the machine’s performance and output over a days work. Producing 50-60 wrapped bales an hour the single pass patented McHale bale transfer, increases productivity and reduces operation costs, while increasing profits.
Contractors and Farmers all over the world use the Fusion 3 integrated baler wrapper during their silage season in the production of round baled silage. The McHale Fusion 3 integrated baler wrapper has gained a reputation for the production of high density bales and as a result of its highly accurate vertical wrapping ring, the Fusion 3 produces very good quality silage fodder.
McHale Fusion 3 integrated baler wrappers can be seen working during the Spring and Summer months in both hemispheres, the main crops baled are grass and lucerne or alfalfa however more progressive contractors and farmers are also baling other crops. The Fusion 3 integrated baler wrapper can also be used in the production of round bales of hay and straw bales, in which case the bale wrapping table can be used to accumulate the hay or straw round bales and leave them in pairs in the field for collection. The McHale Fusion 3 integrated baler wrapper has established a reputation for the production of high density round bales of silage, hay and straw.
The McHale Fusion 3 Integrated Baler Wrapper can be seen working in over 50 countries and the Fusion 3 has become the integrated baler wrapper of choice for high output contractors and more progressive dairy farmers in – Ireland, England, Scotland, Wales, France, Germany, Austria, Switzerland, Holland, Sweden, Norway, Finland, Denmark, Poland, Hungary, Canada, USA, Korea, Australia and New Zealand.aa
The bale chamber on the McHale Fusion 3 integrated baler wrapper splits horizontally (like a clam shell) and the lower section of the bale chamber doubles as a transfer mechanism to transfer the netted bale into the vertical wrapping ring. This unique McHale patented system delivers a number of advantages over other integrated baler wrappers, namely in terms of;
Read More
On the McHale Fusion 3 Integrated Baler Wrapper the left hａnd side of the gearbox drives the rollers in the bale chamber, while the pick up and chopper unit are driven from the right hａnd side of the machine. This system ensures direct short transfer paths and optimal power distribution.
The McHale Fusion 3 integrated baler wrapper is fitted with a high capacity 2.1 metre galvanised pick up which lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The pick up is fitted with lateral feed augers that smoothly guide the crop into the chopping unit. The pick up features
Read MoreA crop compression roller is also available as an optional extra on the Fusion 3. This roller evens out lumps in the swarth and minimises the risk of blockages when working in heavy swarths.
The rotor design encourages a uniform crop flow, which reduces the risk of blockage, thus maximising output. The chopping unit features 25 knives. Knives in the chopping unit are made from hardened tool steel and can be engaged and disengaged from the tractor cab. When engaged the knives extend into the spine of the rotor, which ensures a consistent chop quality.
As baling conditions are not always ideal, uneven swarths can occur which can lead to blockages. The main drive chain on the Fusion 3 integrated baler wrapper is protected by a slip clutch on the PTO.
Read More
The bale chamber on the McHale Fusion 3 integrated baler wrapper produces a 1.23 X 1.25 metre round bale. The heavy-duty bale chamber consists of 18 heavy-duty rollers, which are made from high-grade tubular steel. At all times the roller design ensures positive bale rotation. The roller shafts are 50mm on the drive and non drive side and are fitted with 50mm double raced bearings on main load points on the drive side.
Read MoreThe McHale Fusion 3 integrated baler wrapper is fitted with heavy-duty drive chains and sprockets, which ensure long life and minimum down time.
The roller ends are fitted with a McHale designed reverse thread sealing system, which ensures that any material, which tries to get into bearings, is automatically threaded out.
The bearings and chains are supported by a progressive greasing and oiling system.
The blocks measure and regulate the amount of grease and oil going to the bearings and chains. This ensures that the machine consistently delivers the correct amount of oil or grease depending on the load the components are under.
The vertical wrapping ring on the Fusion 3 integrated baler wrapper is fitted with two 750mm dispensers, which take approximately 20 seconds to apply 4 layers of film and 30 seconds to apply six layers of film using both dispensers. This means the wrapping platform is always waiting for the next bale.
Read MoreThe dispensers are fitted with film break sensors, which notify the operator through the control box in the tractor cab if one or both dispensers run out of film. If one dispenser runs out of film the Fusion 3 will continue working and automatically slow bale rotation and increase the number of rotations of the wrapping ring to ensure that the round bale is wrapped correctly.
On the last rotation of the wrapping cycle the cut and holds extend out and the wrapping film is gently supported in the cut and hold rails, once supported the cut and hold gathers the wrapping film to one point where it is cut and held. This system makes the Fusion 3 integrated baler wrappers performance much more reliable particularly in hot or wet conditions.
The McHale Fusion 3 integrated baler wrapper is controlled by an expert plus control console, which controls baler and wrapper operation and makes it fully automatic.
The expert plus control console features a large graphic display, which allows the machine operator to view graphically what stage the machine is at in the baling and wrapping cycle.
Machine Operation – Fusion 3 Integrated Baler Wrapper
On entering a field, an operator can select from the control console, if they want:
As the Fusion 3 enters a field and moves up along the swarth, the following is the sequence of events:
Selectable knives provides the operator with three options. They can choose to engage and chop with a bank of 12 knives or a bank of 13 knives. Should fine chopping be required the operator can choose to engage both knife banks, which will give a 25 knife chopper system – capable of delivering a theoretical chop length of 46mm.
| Width | 2.76/2.94m* |
| Length | 5.8m |
| Weight | 5500Kgs |
| Height | 3.02m |
| Working width | 2100mm |
| Pick Up Guide Wheels (pneumatic) | Standard |
| Tine Spacing | 70mm |
| Pick Up Lift | Hydraulic |
| Tine Bars | 5 |
| Max No. of Knives | 25 |
| Unblocking System | Drop Floor |
| Knife Control | Hydraulic from Tractor Cab |
| Knife Protection | Hydraulic |
| Theoretical Chop Length | 46 mm |
| Bearings | 50mm** |
| Number of Rollers | 18 |
| Width (m) | 1.23 |
| Diameter (m) | 1.25 |
| Greasing | Progressive (Standard) |
| Net Adjustment | Manual on Baler |
| Net Roll Capacity | 1+1 Storage |
| Net System | Pivot Stretch (4 bar) |
| Control | Manual or Automatic |
| Dispensers | 70%2 x 750mm |
| Film Stretch | 70% standard (55% optional) |
| System | Vertical Wrapping Ring |
| Film Storage | 10 Rolls & 2 on the Wrapper |
| Film Layers | 2+2+2 System |
| Chain Lubrication | Progressive (Standard) |
| Pick Up Protection | Slip Clutch |
| Main Drive Protection | Cam Clutch |
| Gearbox | Split Drive |
| Operation | Fully Automatic Electronic |
| Control System | Expert |
| Density Adjustment | On Baler Valve |
| Operation | Fully Automatic Electronic |
| Control System | Expert |
| Density Adjustment | On Baler Valve |
| Tyre Sizes | 560/60R 22.5 (standard) 650/50R 22.5 (optional) |
| Electronics | 12 Volt DC, 7 amp approx. |
| Min. Hydraulic Flow | 45 litres / min at 180 bar |
| Hydraulic System | Open, Closed or Load Sensing |
| Minimum PTO Power Requirements | 80kW (107hp) |
**Bearings are 50mm double raced on the main load points.
*Width will depend on tyre selection.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
農機網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
