進口鍛鋼高壓球閥｜進口高壓鍛鋼球閥
德國托普進口鍛鋼高壓球閥技術參數：
工作壓力：1.0Mpa-42.0Mpa 150LB~2500LB
工作溫度：-196~+550℃
適用介質：水、油、蒸氣、硝酸類（溫度≤200℃ ）、醋酸類（溫度≤200℃ ）
驅動方式：手動、蝸輪、氣動、電動等。連接方式：法蘭、焊接、對焊、承插焊、等。
閥體材質：鍛鋼、A105、F11、F22、不銹鋼、（304、304L、316、316L）鉻鉬鋼
進口鍛鋼高壓球閥產品概述：
進口鍛鋼高壓球閥閥體在兩閥座部位沿與閥門通道軸線相垂直的截面分為三部分，整臺閥門沿閥桿中心軸左右對稱，它在管道上主要用于切斷、分配和改變介質流動方向。它的大樞軸結構保證在高壓下準確的球體中心位置，保證了閥門良好的操作性能；標準閥座采用彈簧結構，將閥座推向球體，保證了良好的進出口雙向密封性能；利用自帶的排放閥，閥體中腔可向外排放；樞軸采用防吹出保護結構，有效地防止泄漏；低磨擦系數的軸承，使得扭矩減少到zui小，便于閥門啟閉；閥桿與閥體有效的接觸，使防靜電接地裝置性能*等。具有性能優異，可靠性高，用途廣泛，價格合理等優點。
Forged steel ball valve high pressure in two seat parts along the section perpendicular to the channel axis and the valve is divided into three parts, the whole valve stem along the central axis symmetrical, it is in the pipeline is mainly used for cutting, distribution and change the flow direction of medium. The sphere center position accuray under high pressure to ensure the pivot of its structure, ensure the valve performance good; standard seat with the spring structure, will push the ball seat, to ensure a good sealing performance of import and export; the use of built-in discharge valve, the valve in the cavity can be discharged; the pivot blowout proof structure to effectively prevent leakage; bearing, low friction coefficient, the torque is reduced to a minimum, so the valve opening and closing the valve rod and the valve body; effective contact, the anti electrostatic grounding device for superior performance. With excellent performance, high reliability, wide application, reasonable price and so on.
進口鍛鋼高壓球閥產品特點：
1、開關扭矩小，配置電動執行器小，工作穩定、可靠；
2、結構緊湊，重量輕，外形簡潔、美觀；
3、該閥既能適用高真空，又能適用一定的正壓力下使用；
4、由于球閥全通導，又能達到超高真空要求，所以也能適用于加速器真空系統
1, switching torque is small, the configuration of the electric actuator is small, stable and reliable;
2, compact structure, light weight, simple and beautiful appearance;
3, the valve can be applied to high vacuum, but also can be used under certain positive pressure;
4, the ball all through the guide, and can meet the requirements of ultra high vacuum, so it can be applied to the accelerator vacuum system
