進口屏蔽式管道泵｜美國進口屏蔽式管道泵
進口屏蔽式管道泵產品特點：
1、泵結構緊湊，機泵一體化，體積小。其立式結構具有安裝占地面積小，運行平穩，安裝無需調整。
2、泵進出口設計成規格相同法蘭，且位于同一中心線上，可象閥門一樣直接安裝在管路上，且中心低，便于管道布置，安裝特別方便。
3、泵與電機同軸，軸向尺寸短，使泵運行更加平穩，噪音低。
4、取消傳統軸封方式，避免了輸送介質的外泄，因此具有*無泄露的顯著特點。
5、用滑動軸承替代常規電機滾動軸承，使泵具有運行特別平穩，振動噪音極低。
6、安裝檢修方便，無需拆動管路系統，只要拆下連接體螺母即可抽出全部轉子部件進行檢查和維修。
進口屏蔽式管道泵工作條件：
- 電源額定電壓為380V，頻率為50Hz，三相交流電；2、輸送流體不應含有體積比超過0.1%和粒度大于0.2mm的固體顆粒；3、輸送液體的溫度≤120℃；4、 系統壓力不超過1.0MPa，不小于50Kpa；如超過請訂貨時注明5、環境溫度不超過40℃ 6、海拔不超過1000mm
進口屏蔽式管道泵技術參數：
流量：6.3～1080m3/h
揚程：12.5～125m
口徑：40～300mm
轉速：1450r/min、2900r/min
功率：0.37～160kw
進口屏蔽式管道泵美國泰樂TYLER售后服務：
*的服務鑄就*的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。
Inlet shield type pipeline pump
Features of imported canned pipeline pump:
1, the pump structure is compact, the pump integration, small size. The vertical structure of the utility model has the advantages of small installation area, stable operation and no need to adjust the installation.
2, the pump inlet and outlet design into the same size of the flange, and is located in the same center line, can be installed directly in the pipeline as the valve, and the center is low, easy to pipe layout, installation is particularly convenient.
3, pump and motor coaxial, short axial size, so that the pump running more smoothly, low noise.
4, cancel the conventional shaft seal to avoid leakage of medium, therefore has the advantages of no leakage.
5, the use of sliding bearings instead of conventional motor rolling bearings, so that the pump has a particularly stable operation, low vibration noise.
6, easy installation and maintenance, without dismantling the pipeline system, as long as the removal of the connection nut can be extracted from all the rotor parts for inspection and maintenance.
Working conditions of imported canned pipe pump:
1, the power supply rated voltage 380V, frequency 50Hz, three-phase alternating current; 2, the transmission fluid containing solid particles should not exceed 0.1% and the volume ratio of particle size greater than 0.2mm; the temperature is less than or equal to 3, liquid and 120 DEG C; 4, the system pressure is less than 1.0MPa, not less than 50Kpa; please specify when ordering more than 5 the ambient temperature does not exceed 40 degrees, 6 at no more than 1000mm
Technical parameters of imported canned pipeline pump:
Flow: 6.3 ~ 1080m3/h
Head: 12.5 ~ 125m
Caliber: 40 ~ 300mm
Speed: 1450r/min, 2900r/min
Power: 0.37 ~ 160kW
The United States imports shielded pipeline pump TYLER Taylor customer service service:
The first-class service created a first-class enterprise so that customers no worries.
1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..
2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.
3, our company provides more than twelve months warranty period, the time from the date of acceptance.
4, in the correct installation and use, product quality problems, the company will be responsible in the end.
會員1.png)
QQ:2568841715
