進口變量柱塞泵美國進口變量柱塞泵

I:柱塞泵（piston pump，plunger pump）屬于容積式泵，往復泵。柱塞泵通過柱塞在柱塞缸體中作往復運動，造成柱塞缸體中密封容積的變化而產生的壓力差而使流體介質進行工作。改變柱塞的工作行程就可以控制柱塞泵流量的大小。柱塞泵是液壓和氣動傳動中重要工作部件。常見的柱塞泵分為徑向柱塞泵，軸向柱塞泵。

II：  變量柱塞泵的工作原理：變量柱塞泵是往復泵的一種，屬于體積泵，其柱塞靠泵軸的偏心轉動驅動，往復運動，其吸入和排出閥都是單向閥。當柱塞外拉時，工作室內壓力降低，出口閥關閉，低于進口壓力時，進口閥打開，液體進入；柱塞內推時，工作室壓力升高，進口閥關閉，高于出口壓力時，出口閥打開，液體排出。當傳動軸帶動缸體旋轉時，斜盤將柱塞從缸體中拉出或推回，完成吸排油過程。柱塞與缸孔組成的工作容腔中的油液通過配油盤分別與泵的吸、排油腔相通。變量機構用來改變斜盤的傾角，通過調節斜盤的傾角可改變泵的排量。    

III：.美國泰樂TYLER軸向變量柱塞泵特點：

①使用壓力高，額定壓力高。柱塞泵的工作壓力一般為20-40MPa，zui大可達1000MPa。

②容易進行變量。通過改變柱塞的行程和改變泵的旋轉方向，容易實現單向或雙向變量.

③有較寬的轉速范圍。設計上可以選用不同的柱塞肖徑或數量，因此可得到不同的流量。

④傳輸?shù)墓β蚀?，壽命長。

當然柱塞泵也存在對介質清潔度要求較高，結構較復雜、制造成本高、維修困難等缺點，但與齒輪泵、葉片泵相比，柱塞泵具有額定壓力高，結構緊湊、效率高及流量調節方便等優點。被廣泛用于高壓、大流量和流量需要調節的場合，諸如液壓機、工程機械和船舶中。

美國泰樂TYLER進口變量柱塞泵技術參數：

排量：820.5-500L/min
流量：28.2-728L/min
壓力：35-40MPa
轉速：1120-4750r/min
驅動功率：17-438kw
規格：20-500mm

 IIII: 美國泰樂TYLER產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域，以及人們?nèi)粘Ｉ钪小?/span>

IIIII:三大承諾：

1、絕dui保證全新*美國泰樂TYLER品牌

2、絕dui保證安全準時發貨

3、絕dui保證售后服務質量

4、作為變速箱和液壓系統的制造商，傳動和控制專家美國泰樂風機制造商提供系統解決方案。

美國泰樂TYLER是領xian的傳動與控制技術專家。憑借在傳動、控制以及行走機械領域內的豐富經驗。 50多萬家客戶提供量身定制的解決方案，是世界工業及工廠自動化、行走機械應用與可再生能源應用市場上的*。

Variable inlet piston pump

I: plunger pump (piston pump, plunger pump) is a positive displacement pump, reciprocating pump. Plunger pump through the plunger in the plunger cylinder for reciprocating motion, resulting in the change in the volume of the cylinder seal pressure difference caused by the fluid medium to work. Changing the working stroke of plunger can control the size of the piston pump. Piston pump is an important part of hydraulic and pneumatic transmission. Common piston pump is divided into radial piston pump, axial piston pump.

II: working principle variable piston pump: variable piston pump is a reciprocating pump, which belongs to the volume pump, the plunger pump by the eccentric rotation of the shaft driven reciprocating motion, the suction and discharge valve is a one-way valve. When the plunger is pulled in the studio, pressure drop, outlet valve closed, below the inlet pressure, inlet valve is opened, the liquid into the inside of the piston; when studio pressure increases, the inlet valve is closed, the pressure is higher than that of export, export valve open, liquid discharge. When the drive shaft drives the cylinder rotates, the swash plate piston from the cylinder will be pulled or pushed back, complete oil suction and exhaust process. Piston and cylinder composed of working oil containing fluid chamber through the valve plate are respectively communicated with the suction and discharge chamber pump. The variable mechanism is used to change the inclination angle of the swash plate.    

The United States III:. TYLER Taylor axial variable piston pump characteristics:

High pressure, high rated pressure. The working pressure of the plunger pump is generally 20-40MPa, the maximum can reach 1000MPa.

Easily variable. By changing the stroke of the plunger and changing the direction of rotation of the pump, it is easy to achieve one-way or two-way variables

Wider range of speed. The design can choose different plunger diameter or number, so can get different flow.

The power transmission of large, long life.

Of course, there are higher requirements for piston pump of medium clean, complex structure, high manufacturing cost, maintenance difficulties and shortcomings, but compared with the gear pump, vane pump, piston pump with high rated pressure, compact structure, high efficiency and flow and easy adjustment. Widely used in high pressure, large flow and flow conditions, such as hydraulic press, construction machinery and ship.

The United States Taylor TYLER import variable piston pump technical parameters:

Displacement: 820.5-500L/min

Flow: 28.2-728L/min

Pressure: 35-40MPa

Speed: 1120-4750r/min

Drive power: 17-438kw

Specification: 20-500mm

The United States IIII: TYLER tylosin products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

IIIII: three promises:

1, the vast Dui ensure the new imported American Taylor TYLER brand

2, the Dui to ensure safe and punctual delivery

3, Dui to ensure the quality of after-sales service

4, as the gearbox and hydraulic transmission and control system manufacturers, U.S. experts tylosin wind turbine manufacturers provide system solutions.

The United States is the world's leading TYLER Taylor transmission and control expert xian. With a wealth of experience in the field of transmission, control, and walking machinery. More than and 50 customers to provide customized solutions, is the world's industrial and factory automation, walking machinery applications and renewable energy applications market leader.